MANUFACTURING PROCESS Phase A: Mix all ingredients together and heat to 80-85 °C until everything is melted. Phase B: Add all ingredients of phase B to phase A at 70°C. Phase C: Premix the pigments in the oils until everything is homogeneous and add it to the hot phase A+B and fill into packaging. SPECIFICATION Appearance: solid stick Stability: Microbiological stability proven (Water activity valuehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural. Add phase C and phase D to phase A+B after cooling has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C. Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed. Add phase D+E to the wahas not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and stir until homogeneous. Phase B: Combine all ingredients and add phase B to A while stirring. SPECIFICATION Appearance: White powder Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 10-20 minutes. Then heat phase A+B to 70 °C. Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 5.0 +_ 0.05. has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is homogeneous. Phase B: Simply add lukewarm tap water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved. Let the mixture rest for 24 h. Specification Appearance: Pearlescent gel pH: 5.5 +_ 0.10 Stability: Microbiological stability prhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again. Add phase B to A and stir until everything is dissolved. Heat phase A/B to 80 °C. Phase C: Combine all ingredients and heat to 80 °C. Add then phase C to phase A/B under strong stirring and homogenise. Adjust the pHhas not

Manufacturing Process Phase A: Prepare phase A and heat to 65 °C. Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B under stirring. Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to phase A to emulsify both phases. Stir until the formulation is cooled down. Phase C: Add phase C below 30 °C and stir untilhas not