MANUFACTURING PROCESS Phase A: Mix all ingredients together and stir until homogeneous. Phase B: Combine all ingredients and add phase B to A while stirring. SPECIFICATION Appearance: White powder Stability: Microbiological stability proven (Water activity value less than 0.75)has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Melt all ingredients of phase B (35-40°C) and add to phase A. Mix until everything is homogeneous. Press mixture into molds. Specification Appearance: Solid, white bar Stability: Microbiological stability proven (Water activity value less than 0.75)has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is homogeneous. Phase B: Simply add lukewarm tap water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved. Let the mixture rest for 24 h. Specification Appearance: Pearlescent gel pH: 5.5 +_ 0.10 Stability: Microbiological stability prhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve Cosphaderm® CA natural. Then heat phase A to 80 °C. Phase B: Combine all ingredients and heat to 80 °C. Add then phase B to phase A under strong stirring. Add phase C to the finished formulation. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: White cream pH: 5.5 +_ 0.05 Sthas not

Manufacturing Process Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6. Phase B: Combine all of the ingredients and stir with a stirring rod until the powder is moistened. Add phase A to phase B while stirring at medium speed to avoid air bubbles. If everything is dissolved heat the mixture has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 +_ 0.05. Thas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® pAS natural. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjhas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural and Cosphaderm® AS. Heat phase A to 70 °C. Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved. Heat phase B to 70 °C. Add phase B to phase A under very soft stirring. Phase C: Add phase C below 40 °C to the finished formulation. Adjust the phas not