FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.

We have provided a selected set of formulations for you to download here – enjoy!

FaceCare

VITALISING SKIN GEL (B) ALL NATURAL INGREDIENTS

100.28.3.1

QUICKLY ABSORBING. RICH SKIN FEEL. HYDRATING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
4.00
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
1.00
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Demin. Water
Aqua
-
59.70
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.40
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.20
B Demin. Water
Aqua
-
22.50
B Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
3.50
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
5.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.50

Manufacturing Process
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved.
Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Prepare phase C and homogenise for 5 minutes with high performance disperser (stator/rotor) at max. speed.
Add phase B to phase A in small steps under stirring.
Adjust pH value to 5.5 ± 0.05.

Specification
Appearance: Shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

RICH & NATURAL W/O CREAM ALL NATURAL INGREDIENTS

100.71.2.1

REGENERATING. PROTECTING. SOFT TEXTURE.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
70.60
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.40
B Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
1.50
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B Magnesium Sulfate
Magnesium Sulfate
-
0.70
C Imwitor® 600
Polyglyceryl-3 Polyricinoleate
IOI Oleo GmbH
3.00
C Candellila Wax
Euphorbia Cerifera (Candelilla) Wax
-
0.60
C Lanette® O
Cetearyl Alcohol
BASF SE
1.00
C MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
7.00
C Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
5.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Miglyol® Coco 810
Coco-Caprylate / Caprate
IOI Oleo GmbH
3.50
D Cosphaderm® Tapmix
LecithinHelianthus Annuus Seed OilTocopherolAscorbyl Palmitate
Cosphatec GmbH
0.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A.
Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising.
Add phase D to the finished formulation and homogenise.

SPECIFICATION
Appearance: White, slightly beige cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HairCare

ANTI-DANDRUFF SHAMPOO (B) ALL NATURAL INGREDIENTS

400.62.2.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MenCare

REVITALISING DAY CREAM FOR MEN ALL NATURAL INGREDIENTS

600.79.1.1

COOLING. HYDRATING. REFRESHING.

Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Capo, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
78.50
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
C PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
3.50
C Lanette® O
Cetearyl Alcohol
BASF SE
1.50
C Babassu Oil
Orbignya Oleifera Seed Oil
Gustav Heess GmbH
5.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
3.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
1.00
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
D Cosphaderm® Capo
Caprylyl GlycolPropanediol
Cosphatec GmbH
1.00
D Ethanol
Alcohol
-
0.50
D Menthol
Menthol
-
0.20

MANUFACTURING PROCESS
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Phase D: Dissolve the menthol in Cosphaderm® Capo and ethanol and add below 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance:  white emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)