Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete
dissolution. Afterwards lower the pH to approximately 6.
Phase B: Combine all of the ingredients and stir with a stirring rod until the powder is moistened.
Add phase A to phase B while stirring at medium speed to avoid air bubbles. If everything is dissolved
heat the mixture to 70 °C.
Phase C: Add all ingredients of phase C and heat to 70 °C.
Add phase C to A+B and homogenise for 3 – 5 minutes at 10,000 rpm. Then stir with propeller stirrer until
the emulsion is cooled down to <40 °C.
Phase D: Add aloe vera powder and Cosphaderm® TOM to the emulsion and stir until completely cooled
down to room temperature. Adjust pH to 6.0 ± 0.05.
Appearance: Light beige emulsion
pH: 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)