FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.

We have provided a selected set of formulations for you to download here – enjoy!

FaceCare

MOISTURISING FACE GEL

100.29.1.1

HYDRATING. REFRESHING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Pentiol GL, Cosphaderm® Hexiol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
3.00
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.50
A RonaCare® Nicotinamide
Niacinamide
Merck KGaA
4.00
A D-Panthenol 75 %
PanthenolAqua
-
2.00
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
B Carbopol® Ultrez-21
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Cosphatec GmbH
0.40

Manufacturing Process
Combine all ingredients of phase A and stir with a propeller stirrer at 1500 – 2000 rpm until everything is
completely dissolved. Then add phase B to phase A under stirring.
Adjust the pH to 6.0 ± 0.05 to thicken the formulation.

Specification
Appearance: Transparent, clear gel
pH: 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HYDRO JELLY MASK

100.21.3.1

INTENSIVELY HYDRATING. RELAXING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
B Demin. Water
Aqua
-
ad 100
C Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
5.00
C Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.00
C Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
C Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
D Cosmetic Colour
-
q.s.

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
Phase C: Prepare phase C and stir for 10 minutes. Add phase C to phase A+B and adjust pH
to 5.5 – 6.0 ± 0.05.
Phase D: Add colour if wanted.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Translucent or coloured, elastic gel
pH: 5.5 – 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

AFTER-SUN GEL

100.54.2.1

COOLING. STRESS-RELIEVING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® CA natural, Cosphaderm® Pentiol GL

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
0.50
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
A D-Panthenol 75 %
PanthenolAqua
-
1.00
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
3.00
B Demin. Water
Aqua
-
ad 100
B Cosphaderm® CA natural
Cinnamic Acid
Cosphatec GmbH
0.20
B Witch Hazel Water
Hamamelis virginiana water
-
10.00
Ronacare® Allantoin
Allantoin
Merck KGaA
0.20
B Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.50
B Cosphaderm® LA-T
Levulinic AcidGlycerinAqua, Sodium Levulinate, Potassium SorbateAqua
Cosphatec GmbH
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and mix with a stirring rod, then set aside.
Phase B: Add Cosphaderm® CA natural, witch hazel water, allantoin and aloe vera powder to the water
and increase the pH value to 9 – 10. Stir until the powder has dissolved completely. Afterwards, add
Cosphaderm® LA-T to the mixture.
Add phase B to phase A and stir until a slightly viscous gel is formed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, clear, slightly viscous gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

SOOTHING 2IN1 MAKE-UP REMOVER

300.11.1.1

SOOTHING. MAKE-UP REMOVING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
5.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Plantacare® 2000 UP
Decyl Glucoside
BASF SE
0.30
B Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.00
B Cosphaderm® CHA
Caprylhydroxamic Acid
Cosphatec GmbH
0.15
B Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
3.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
20.00
C Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Oil-soluble Colour
-
q.s
C Perfume
Parfum
-
q.s.

Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Specification
Appearance: Two-phase system with coloured oil phase on top of translucent water phase
pH: 5.5 ± 0.05
Stability: Microbiological stability proven

Special Care

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLY CLEANSING. MILDLY FOAMING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
2.50
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
2.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.00
A Vitamin C
Ascorbic Acid
-
2.00
A D-Panthenol 75 %
PanthenolAqua
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
C Plantacare® 818 UP
Coco Glucoside
BASF SE
5.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
10.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)