FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.

We have provided a selected set of formulations for you to download here – enjoy!

FaceCare

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Dicapo

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.50
Cegesoft® SH
Shorea Stenoptera Seed Butter
BASF SE
2.50
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
D Cosphaderm® Dicapo
Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol
Cosphatec GmbH
0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Bodycare

RICH & SOFT HANDCREAM ALL NATURAL INGREDIENTS

200.4.1.2

REGENERATING. SOFT SKIN FEEL. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® MultiMEG

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
Cremer GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.25
C Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
2.50
C Montanov™ 68
Cetearyl AlcoholCetearyl Glycoside
SEPPIC, S.A.
2.00
C Tegomuls
Hydrogenated Palm Glyceride
-
0.50
C Ecorol® 18/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
C Beeswax
Cera alba
Gustav Heess GmbH
0.50
C Carnauba Wax
Cera Carnauba
Gustav Heess GmbH
1.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
C Peach Kernel Oil
Prunus Persica Kernel Oil
Gustav Heess GmbH
1.50
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.50
C Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
D Cosphaderm® MultiMEG
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
Cosphatec GmbH
1.20

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 to phase A under strong stirring. Continue stirring for approx.
15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients together and heat to 80 °C.
Phase C: Add phase C to phase A+B and homogenise for approx. 1 min using Ultra-Turrax. Cool down
under medium stirring.
Phase D: Add Cosphaderm® MultiMEG below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: White, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)