FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.

We have provided a selected set of formulations for you to download here – enjoy!

FaceCare

ANTI-WRINKLE EYE CREAM ALL NATURAL INGREDIENTS

100.49.1.1

MOISTURISING. NURTURING. ANTI-AGEING.

Preservation: Cosphagard® Pol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
72.70
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
2.00
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
B Sesame Oil
Sesamum Indicum Seed Oil
Gustav Heess GmbH
4.00
B Evening Primrose Oil
Oenothera Biennis Oil
Gustav Heess GmbH
3.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
3.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
B Wheat Germ Oil
Triticum Vulgare Oil
Gustav Heess GmbH
2.00
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
2.00
B Imwitor 960 K
Glyceryl Stearate SE
IOI Oleo GmbH
3.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
B Lanette® O
Cetearyl Alcohol
BASF SE
0.50
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B
to phase A under stirring.
After stirring for 5 minutes homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

DAILY FACIAL CREAM ALL NATURAL INGREDIENTS

100.59.1.1

MOISTURISING. CARING. HYDRATING.

Preservation: Cosphagard® Pol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
1.50
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
5.00
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.50
B Witarix® 60/40
Caprylic/Capric Triglyceride
IOI Oleo GmbH
5.00
B Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
5.00
B Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70 °C and add phase B to A while stirring very fast.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

INTENSE MOISTURISING CREAM ALL NATURAL INGREDIENTS

100.109.2.1

ANTI-AGING. HYDRATING. SMOOTHING.

Alternative preservation: Cosphaderm® Dicapo natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
69.60
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
4.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.50
B Lanette® O
Cetearyl Alcohol
BASF SE
3.00
B Cutina® GMS V
Glyceryl Stearate
BASF SE
2.00
B Shea Butter
Butyrospermum Parkii Butter
Gustav Heess GmbH
5.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
7.00
B Grape Seed Oil
Vitis Vinifera Seed Oil
Gustav Heess GmbH
3.00
B Cetiol® OE
Dicaprylyl Ether
BASF SE
2.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® Dicapo natural
Caprylyl GlycolPropanediolGlyceryl Caprylate
Cosphatec GmbH
1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Add phase C to the formulation and stir.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MATTIFYING DAY CREAM ALL NATURAL INGREDIENTS

100.69.1.1

MOISTURISING. QUICKLY ABSORBING. LIGHT GEL CREAM TEXTURE.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GeMix

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
76.30
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
2.00
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
B PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
4.00
B Lanette® O
Cetearyl Alcohol
BASF SE
2.50
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
3.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
4.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
B Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.20
B Cosphaderm® T-70 NON GMO ECO
Helianthus Annuus Seed OilTocopherol
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75-80 °C.  Add phase B to A while stirring and then homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: white gel cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MINIMALIST FACE MOISTURISER ALL NATURAL INGREDIENTS

100.99.2.1

CLEAN BEAUTY. MINIMALIST FORMULATION. HYDRATING.

Alternative preservation: Cosphaderm® Zinc Lactate natural, Cosphaderm® GMUD, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
71.50
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
3.50
B Lanette® 16
Cetyl Alcohol
BASF SE
3.00
B Cosphaderm® GMUD
Glyceryl Undecylenate
Cosphatec GmbH
0.60
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
8.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
12.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Heat the water phase to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Dicapo

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
84.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.50
C Cegesoft® SH
Shorea Stenoptera Seed Butter
BASF SE
2.50
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
D Cosphaderm® Dicapo
Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol
Cosphatec GmbH
0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

RICH NIGHTCREAM

100.6.1.1

ANTI-POLLUTION. NOURISHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Propanediol natural, Cosphaderm® Octiol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A Cosphaderm® Octiol
Caprylyl Glycol
Cosphatec GmbH
0.40
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
C Demin. Water
Aqua
-
67.00
D Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
8.00
D Sesame Oil
Sesamum Indicum Seed Oil
Gustav Heess GmbH
5.00
D Avocado Oil
Persea Gratissima Oil
Gustav Heess GmbH
3.00
D Rosehip Seed Oil
Rosa Canina Fruit Oil
Gustav Heess GmbH
2.00
D Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
1.50
D Cocoa Butter
Theobroma Cacao Seed Butter
Gustav Heess GmbH
1.50
D Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
4.00
D Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.50
D Cosphaderm® E-1000Ac NON GMO
Tocopherol AcetateHelianthus Annuus Seed Oil
Cosphatec GmbH
0.50
D Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
E D-Panthenol 75 %
PanthenolAqua
-
1.00

Manufacturing Process
Phase A: Mix phase A and stir until everything is completely dissolved.
Phase B: Add phase B to phase A and stir until dispersed.
Phase C: Slowly add phase C to phase A+B and stir until complete dissolution.
Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C.
Add phase D slowly to phase A+B+C while stirring.
Phase E: Add Panthenol to the finished formulation (below 40 °C).
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BLACK PEELING MASK ALL NATURAL INGREDIENTS

100.26.2.2

PURIFYING. DETOXIFYING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
53.95
A Kaolin
Kaolin
-
10.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
8.00
A Plantacare® 818 UP
Coco Glucoside
BASF SE
3.00
A Charcoal Powder
Charcoal Powder
-
2.85
A Cinnamic Acid
Cinnamic Acid
-
0.30
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.20
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Mango Butter
Mangifera Indica Seed Butter
-
6.00
B PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
2.50
B Beeswax
Cera alba
Gustav Heess GmbH
2.50
B Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
2.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.20
D Kaolin
Kaolin
-
5.00
D Lipo® AMS
Prunus Amygdalus Dulcis Seed Meal
Vantage Speciality Ingredients, Inc.
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and
Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11
to dissolve it completely.
Then add Cosphaderm® LA-T to lower the pH again.
Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C.
Add phase B to phase A under thorough stirring with the propeller stirrer and homogenise the mixture.
Phase C: Add Cosphaderm® Magnolia Extract 98 to phase A+B under stirring and below 40 °C.
Phase D: Prepare phase D and add it to the formulation. Let the mask cool down under moderate
stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Black, creamy paste with small exfoliants
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ELASTIC JELLY MASK ALL NATURAL INGREDIENTS

100.20.1.1

MOISTURISING. SOOTHING. CALMING.

Alternative preservation: Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
4.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.60
A Cosphaderm® KG
Amorphophallus Konjak Root Extract
Cosphatec GmbH
0.60
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
5.00
A Demin. Water
Aqua
-
59.80
B Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.50
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
5.00
B Demin. Water
Aqua
-
22.50

Manufacturing Process
Phase A: Mix all ingredients except water, then add water and stir until everything is completely
dissolved.
Phase B: Mix all ingredients and homogenise on high-speed for 5 minutes.
Add phase B to A slowly while gently stirring for 10 minutes.
Adjust the pH to 5.45 – 5.55.
Heat the mixture to 90 – 100 °C and keep this temperature for 2 – 3 minutes (Warning: Lecithins are heat
sensitive. Therefore, the process of heating should be kept to a minimum!).
Pour the hot mixture into a suitable mould as fast as possible and let it cool down.

Specification
Appearance: White to off-white gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven

CALMING HYDRO MASK ALL NATURAL INGREDIENTS

100.104.1.1

SOOTHING. MOISTURISING. ANTI-BLEMISH.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Zinc Lactate natural, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.65
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Hexiol natural
1,2-Hexanediol
Cosphatec GmbH
2.00
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Olivem® 1000
Cetearyl OlivateSorbitan Olivate
Hallstar
3.00
B Lanette® 16
Cetyl Alcohol
BASF SE
2.00
B Macadamia Oil
Macadamia Ternifolia Seed Oil
Gustav Heess GmbH
4.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
4.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
5.00
B Evening Primrose Oil
Oenothera Biennis Oil
Gustav Heess GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.05

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed.
Add phase B+C to the water phase while stirring. Homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FACE SHEET MASK

100.27.1.1

ANTI-WRINKLE. MOISTURISING. HYDRATING.

Alternative preservation: Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
84.65
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
8.00
A Cosphaderm® Leo
Dipropylene GlycolEthylhexylglycerinCaprylhydroxamic Acid
Cosphatec GmbH
2.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
B Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.05
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Carbopol® Ultrez 21 Polymer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Lubrizol
0.10

Manufacturing Process
This formulation can be prepared at room temperature.
Phase A: Combine all ingredients.
Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring for approx. 15 min
at 700 – 1000 rpm until complete dissolution.
Adjust pH to 6.5 ± 0.05 if necessary.

Specification
Appearance: Translucent serum
pH: 6.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HYDRO JELLY MASK

100.21.3.1

INTENSIVELY HYDRATING. RELAXING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
B Demin. Water
Aqua
-
82.80
C Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
5.00
C Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.00
C Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
C Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
Phase C: Prepare phase C and stir for 10 minutes. Add phase C to phase A+B and adjust pH
to 5.5 – 6.0 ± 0.05.
Phase D: Add colour if wanted.
Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

Specification
Appearance: Translucent or coloured, elastic gel
pH: 5.5 – 6.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

JELLY EYE PATCHES

100.88.1.1

HYDRATING. REFRESHING. ANTI-AGEING.

Alternative preservation: Cosphaderm® Heptiol natural, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
87.60
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
4.00
A Cosphaderm® Heptiol natural
1,2-Heptanediol
Cosphatec GmbH
1.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
A RonaCare® Nicotinamide
Niacinamide
Merck KGaA
3.00
B Cosmetic Colour
-
q.s.

MANUFACTURING PROCESS
Phase A: Prepare phase A and stir until dispersed. Adjust the pH to 6.5 ± 0.05.
Phase B: Add colour if wanted.
Heat the mixture to 80-90°C and keep this temperature for 2 – 3 minutes.
Quickly pour the hot mixture into a casting mould and let it cool.

SPECIFICATION
Appearance: Translucent or coloured, elastic gel
pH: 6.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

HairCare

SCALP PEELING ALL NATURAL INGREDIENTS

400.93.1.1

EXFOLIATING. HYDRATING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Zinc Lactate natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
85.70
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
2.00
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B D-Panthenol 75 %
PanthenolAqua
-
0.50
B Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Caffeine Powder
Caffeine
-
1.00
B Betaine
Betaine
Clariant AG
2.00
B Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
5.00
B Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.40

MANUFACTURING PROCESS
Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again.
Phase B: Add all ingredients from phase B one after another.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

WARMING SCALP TREATMENT

400.94.1.1

WARMING. HYDRATING. CARING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
67.40
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A D-Panthenol 75 %
PanthenolAqua
-
0.50
A Sodium PCA
Sodium PCA
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Gummi Arabicum
Acacia Senegal Gum
-
0.40
C Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
20.00
C Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
5.00
C Cosphaderm® VBE
Vanillyl Butyl Ether
Cosphatec GmbH
0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Slowly add phase B to A while stirring.
Phase C: Mix all ingredients of phase C and add to phase A+B while stirring.
Adjust the pH to 5.0 ± 0.05.

SPECIFICATION
Appearance: Clear solution
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (A) ALL NATURAL INGREDIENTS

400.62.1.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® Sodium pAS natural
Sodium Anisate
Cosphatec GmbH
0.20
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Specification
Appearance: translucent to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (B) ALL NATURAL INGREDIENTS

400.62.2.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (C)

400.62.3.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
A Cosphaderm® AS
p-Anisic Acid
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CAFFEINE SHAMPOO FOR MEN ALL NATURAL INGREDIENTS

600.55.2.1

NURTURING. VITALISING. BOOSTING HAIR GROWTH.

Preservation: Cosphagard® Pol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
60.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
6.00
A Natural Caffeine Green
Caffeine
-
1.00
A Zinc PCA
Zinc PCA
-
0.30
A Hydrolyzed Wheat Protein
Hydrolyzed Wheat Protein
-
1.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
A Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
2.00
B Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
10.40
B Plantacare® 818 UP
Coco Glucoside
BASF SE
10.60
B Dehyton® K
Cocamidopropyl Betaine
BASF SE
3.20
B Imwitor® PG3 C10
Polyglyceryl-3 Caprate
IOI Oleo GmbH
1.50
B SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.50
C D-Panthenol 75 %
PanthenolAqua
-
1.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Combine all ingredients and heat phase B to 40 – 50 °C.
Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed.
Phase C: Add panthenol to the mixture (<40 °C).
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish, slightly turbid, viscous gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CONDITIONING SHAMPOO ALL NATURAL INGREDIENTS

400.3.1.1

CONDITIONING. SLES-FREE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® TOM, Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
68.90
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Sulfopon® 1216 G
Sodium Coco Sulfate
BASF SE
6.50
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
7.35
B Dehyton® K
Cocamidopropyl Betaine
BASF SE
4.90
B Plantacare® 818 UP
Coco Glucoside
BASF SE
2.50
C Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.00
D Cosphaderm® TOM
Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.80
D Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
D Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.05

Manufacturing Process
Phase A: Mix all ingredients of phase A and stir until everything is dissolved.
Phase B: Mix phase B and heat phase A and B separately to 50 °C.
Add phase A to phase B under soft stirring. Try to avoid air bubbles.
Adjust the pH to 5.0 ± 0.05.

Specification
Appearance: Yellowish gel
pH: 5.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.00
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
2.50
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
2.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.00
A D-Panthenol 75 %
PanthenolAqua
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
C Plantacare® 818 UP
Coco Glucoside
BASF SE
5.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
10.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

POWDER SHAMPOO ALL NATURAL INGREDIENTS

300.67.2.1

SUSTAINABLE. POWDER TO GEL. EASY TO REFILL.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Zinc Lactate natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Sodium Lauryl Sulfoacetate
Sodium Lauryl Sulfoacetate
-
8.00
A BergaSoft SCI 80
Sodium Cocoyl Isethionate
Berg + Schmidt GmbH & Co. KG
5.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.10
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00
A Citric Acid
Citric Acid
-
0.10
A Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
0.50
A Sorbitol
Sorbitol
-
2.00
A Sodium Chloride
Sodium Chloride
-
0.45
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
B Water
Aqua
-
82.35

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is homogeneous.
Phase B: Simply add lukewarm water to the bottle, then add in your powder shampoo. Shake for approximately 30 seconds and wait until everything has been dissolved.

Specification
Appearance: Pearlescent gel
pH: 5.5 ± 0.10
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

POWDER TO FOAM SHAMPOO ALL NATURAL INGREDIENTS

400.89.1.1

WATERLESS. INSTANT WATER-ACTIVATED FORMULATION FOR IMMEDIATE USE. CLEAN BEAUTY.

Alternative preservation: Cosphaderm® Zinc Lactate

PHASE Ingredient Cosmos INCI SUPPLIER %
A Sodium Cocoyl Isethionate
Sodium Cocoyl Isethionate
Berg + Schmidt GmbH & Co. KG
53.00
A Sorbitol
Sorbitol
-
10.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
3.00
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
1.00
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
2.00
A Citric Acid
Citric Acid
-
0.80
A Hydrolyzed Wheat Protein
Hydrolyzed Wheat Protein
-
1.50
A Magnesium Stearate
Magnesium Stearate
-
10.00
A Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
1.00
A CORN PO4 PH “B“
Distarch Phosphate
Agrana
10.00
A Sensocel® bc 20
Cellulose
CFF GmbH & Co. KG
5.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.50
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Mix all ingredients together and stir until homogeneous.
Phase B: Combine all ingredients and add phase B to A while stirring.

SPECIFICATION
Appearance: White powder
Stability: Microbiological stability proven (Water activity value less than 0.75)

INTENSE REPAIR HAIR MASK ALL NATURAL INGREDIENTS

400.85.1.1

CONDITIONING. SMOOTHING. GLOSSY.

Alternative preservation: Cosphaderm® Octiol natural, Cosphaderm® Sodium LAAS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
75.90
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Betaine
Betaine
-
2.00
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
0.70
A Cosphaderm® Octiol natural
Caprylyl Glycol
Cosphatec GmbH
0.50
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
1.00
C Lanette®N
Cetearyl AlcoholSodium Cetearyl Sulfate
BASF SE
2.50
C Lanette® O
Cetearyl Alcohol
BASF SE
2.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
2.00
C Coconut Oil
Coco Nucifera Oil
Gustav Heess GmbH
3.00
C Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
2.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.50
C Broccoli Seed Oil
Brassica Oleracea Seed Oil
-
1.00
C SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 20 minutes. Then heat phase A+B to 70 °C.
Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 4.8 ± 0.05.

SPECIFICATION
Appearance: Light beige gel cream
pH: 4.8 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

LEAVE-IN HAIR CREAM ALL NATURAL INGREDIENTS

400.91.1.1

CONDITIONING. HYDRATING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Absolute, Cosphaderm® Octiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
52.00
A Inulin
Inulin
-
1.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.25
A Sclerotium Gum
Sclerotium Gum
-
0.25
B Cosphaderm® Absolute
PropanediolSodium LactateBetaineAqua
Cosphatec GmbH
20.00
C Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.50
C Lanette® O
Cetearyl Alcohol
BASF SE
4.00
C Stearic Acid
Stearic Acid
-
2.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
7.00
C Cosphaderm® Octiol natural
Caprylyl Glycol
Cosphatec GmbH
0.30
C Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
3.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
3.00
C MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
4.00
C SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C.
Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under
strong stirring and homogenise the formulation.
Adjust the pH to 4.5 ± 0.05.

SPECIFICATION
Appearance: White cream
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

PURIFYING CLEANSING LOTION

300.32.3.1

MAKE-UP REMOVING. PURIFYING. CLEANSING.

Preservation: Cosphagard® Pol, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
10.00
A Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
12.00
A Lanette® O
Cetearyl Alcohol
BASF SE
5.00
A Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
A Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.30
B Demin. Water
Aqua
-
ad 100
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
B Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.20
B Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C D-Panthenol 75 %
PanthenolAqua
-
1.00
C Ronacare® Allantoin
Allantoin
Merck KGaA
0.50

Manufacturing Process
Phase A: Prepare phase A and heat to 65 °C.
Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B
under stirring.
Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to
phase A to emulsify both phases. Stir until the formulation is cooled down.
Phase C: Add phase C below 30 °C and stir until everything is mixed.
Adjust the pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: White gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT CLEANSING FOAM ALL NATURAL INGREDIENTS

300.83.1.1

GENTLE CLEANSING. REFRESHING. SOOTHING.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
83.40
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A D-Panthenol 75 %
PanthenolAqua
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.10
B Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.10
C Plantacare® 818 UP
Coco Glucoside
BASF SE
4.00
C Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
4.00
C SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
C Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
0.80

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Add phase B to phase A under stirring.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under
stirring.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent solution
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT FACE CLEANSER

300.14.1.2

MILDLY CLEANSING. SENSITIVE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® LA-T

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.35
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
A Cosphaderm® CHA
Caprylhydroxamic Acid
Cosphatec GmbH
0.15
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
4.00

Manufacturing Process
Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA while stirring, then
heat mixture to 70 °C. Stir phase A until complete dissolution.
Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring.
Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

JELLY SOAP

300.22.1.2

CLEANSING. FOAMING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Octiol, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
2.00
A Cosphaderm® Octiol
Caprylyl Glycol
Cosphatec GmbH
0.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
1.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
B Demin. Water
Aqua
-
83.50
C Plantacare® 810 UP
Caprylyl/Capryl Glucoside
BASF SE
2.00
C Texapon® NSO UP
Sodium Laureth Sulfate
BASF SE
5.00

Manufacturing Process
Phase A: Prepare phase A and stir until dispersed.
Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution.
If wanted, add heat-proof colour.
Phase C: Prepare phase C, adjust the pH to 5.5 ± 0.05 and set aside.
Heat phase A+B to its boiling point and keep this temperature for 2 – 3 min.
Add phase C to the hot phase A+B. Continue stirring until everything is combined.
Quickly pour the warm mixture into moulds and let it cool down.

Specification
Appearance: Clear, solid, elastic jelly
pH: 5.5 – 6.5
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL JELLY SOAP ALL NATURAL INGREDIENTS

300.96.1.1

MILD. CLEANSING. FOAMING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Sodium LAAS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
3.00
A Cosphaderm® KG
Amorphophallus Konjac Root Extract
Cosphatec GmbH
0.50
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
B Demin. Water
Aqua
-
69.50
B Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
8.00
B Plantacare® 818 UP
Coco Glucoside
BASF SE
12.00
B SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
C Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until dispersed.
Phase B: Prepare phase B and lower the pH to ~ 5.5.
Add phase C and phase A to phase B.
Adjust the pH to 5.5 ± 0.05.

Heat the prepared solution to 80 – 90 °C and stir at this temperature for 2 – 3 min.
Quickly pour the warm mixture into moulds and let it cool down.

SPECIFICATION
Appearance: Clear, solid, elastic jelly
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL LIQUID SOAP ALL NATURAL INGREDIENTS

300.40.2.1

FOAMING. SLES-FREE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Glycerin
Glycerin
-
4.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
A Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.20
B Cosphaderm® EGCg ECONAT
Camellia Sinensis Leaf Extract
Cosphatec GmbH
0.10
B Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00
B Demin. Water
Aqua
-
ad 100
C Plantacare® 818 UP
Coco Glucoside
BASF SE
7.00
C Plantacare® 810 UP
Caprylyl/Capryl Glucoside
BASF SE
3.00

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until Cosphaderm® X 34 and Cosphaderm® Sodium Hyaluronate are dispersed.
Phase B: Add phase B to phase A.
Phase C: Add phase C to phase A+B under stirring.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Light yellow gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT CREAM SOAP

300.47.2.1

CLEANSING. FOAMING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Carbopol® Ultrez 21 Polymer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Lubrizol
0.40
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00
B Texapon® NSO UP
Sodium Laureth Sulfate
BASF SE
15.00
B Plantacare® 818 UP
Coco Glucoside
BASF SE
12.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
2.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Phenylpropanol
Phenylpropanol
-
0.30

Manufacturing Process
This formulation can be prepared at room temperature.
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both
phases are mixed.
Phace C: Add Cosphaderm® PhP to phase A+B. Adjust th pH to 5.5 ± 0.05.

Specification
Appearance: Transparent liquid
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BATH BOMB ALL NATURAL INGREDIENTS

300.68.1.1

FIZZY. SOOTHING. RELAXING.

Alternative preservation: Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Sodium Bicarbonate
Sodium Bicarbonate
-
42.00
A Citric Acid
Citric Acid
-
21.00
A Corn Starch
Zea Mays Starch
-
20.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
A BergaSoft SCI 80
Sodium Cocoyl Isethionate
Berg + Schmidt GmbH & Co. KG
2.50
B Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.80
B Coconut Oil
Coco Nucifera Oil
Gustav Heess GmbH
13.50

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Melt all ingredients of phase B (35-40°C) and add to phase A. Mix until everything is homogeneous.
Press mixture into molds.

Specification
Appearance: Solid, white bar
Stability: Microbiological stability proven (Water activity value less than 0.75)

CREAMY BODY WASH ALL NATURAL INGREDIENTS

300.50.1.1

FOAMING. CLEANSING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
2.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.70
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
0.92
B Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
9.50
B Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
7.00
B Texapon® K 30 UP
Sodium Coco Sulfate
BASF SE
6.50
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
C 25 % Sodium Chloride Solution
AquaSodium Chloride
-
16.00

Manufacturing Process
Phase A: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Phase B: Combine phase B and add phase B to phase A under slow stirring.
Phase C: Add phase C to phase A+B to thicken the formulation.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white gel
pH: 5.5 ± 0.05.
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL PEELING GEL ALL NATURAL INGREDIENTS

300.95.1.1

NATURAL PEELING BEADS. REFINING. CLEANSING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
81.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
A Potassium Chloride
Potassium Chloride
-
1.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.50
A Sorbitol
Sorbitol
-
2.00
A Cosphaderm® Sodium LAAS
Sodium AnisateSodium Levulinate
Cosphatec GmbH
1.00
A D-Panthenol 75 %
PanthenolAqua
-
0.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
B Plantacare® 2000 UP
Decyl Glucoside
BASF SE
4.00
C WorléeBeads Jojoba 20/60
Hydrogenated Jojoba Oil
Worlée-Chemie GmbH
1.00

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Add phase B to A carefully to avoid foaming.
Adjust the pH to 5.5 ± 0.05.
Phase C: Add phase C to the final formulation while stirring.

SPECIFICATION
Appearance: Transparent gel with small peeling beads
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FRESH MAGNOLIA TOOTHPASTE

300.23.1.1

ACTIVE AGAINST CARIES. FLUORIDE-FREE. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Magnolia Extract 98, Cosphaderm® TOM, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.10
A Cosphaderm® TOM
Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
2.00
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
15.00
B Demin. Water
Aqua
-
ad 100
B Xylitol
Xylitol
-
2.00
C Carbopol® Ultrez-21
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Lubrizol
0.10
C Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
D Kaolin
Kaolin
-
10.00
D Calcium Carbonate
Calcium Carbonate
Carl Roth GmbH & Co. KG
30.00
E Ethanol
Alcohol
Carl Roth GmbH & Co. KG
1.00
E Menthol
Menthol
FREY&LAU GmbH
0.50
F Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
2.00

Manufacturing Process
Phase A: Combine ingredients and stir until Cosphaderm® Magnolia Extract 98 is dissolved.
Phase B: Prepare phase B and add to phase A under stirring. Heat the mixture to 50 °C.
Phase C: Slowly add phase C into A+B and stir until complete dissolution.
Phase D: Prepare phase D and add it to phase A+B+C under stirring.
Phase E: Add phase E to the mixture and stir for 10 minutes at 1000 rpm.
Phase F: Prepare phase F and add it to the finished formulation. Adjust the pH to 7.0 ± 0.05.

Specification
Appearance: Milky-white paste
pH: 7.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

REFRESHING MOUTHWASH ALL NATURAL INGREDIENTS

300.80.1.1

NATURAL. MILD. ALCOHOL-FREE.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Zinc Lactate natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
82.90
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Xylitol
Xylitol
-
3.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.05
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
8.00
B Menthol
Menthol
-
0.05
C Dehyton® K
Cocamidopropyl Betaine
BASF SE
0.10
C Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.40
C Potassium Citrate
Potassium Citrate
-
0.50
D Cosmetic Colour
-
q.s.

MANUFACTURING PROCESS
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Dissolve the menthol in Cosphaderm® Propanediol natural add phase B to phase A under soft stirring.
Phase C: Add all ingredients of phase C and stir until everything is completely dissolved.
Adjust the pH to 7.0 ± 0.05.

SPECIFICATION
Appearance: transparent liquid
pH: 7.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Bodycare

AFTER SUN LOTION ALL NATURAL INGREDIENTS

200.78.2.1

SOOTHING. HYDRATING. REGENERATING.

Alternative preservation: Cosphaderm® Sodium pAS natural, Cosphaderm® Zinc Lactate, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
71.90
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
4.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Sodium pAS natural
Sodium Anisate
Cosphatec GmbH
0.30
A Cosphaderm® Zinc Lactate natural
Zinc Lactate
Cosphatec GmbH
0.50
A Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.10
A RonaCare® Ectoin
Ectoin
Merck KGaA
1.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.50
B Lanette® O
Cetearyl Alcohol
BASF SE
1.50
B Witarix® MCT 60/40
Caprylic/Capric Triglyceride
CREMER OLEO GmbH & Co. KG
4.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
3.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
2.50
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75 °C and add phase B to A while homogenising.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance:  white emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

IN-SHOWER BODY LOTION ALL NATURAL INGREDIENTS

200.51.2.1

LIGHT SKIN FEEL. HIGH SPREADABILITY. MOISTURISING.

Preservation: Cosphagard® Pol, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.40
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.60
A Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
2.00
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
2.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
4.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
4.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
3.00
B SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
B Macadamia Nut Oil
Macadamia Ternifolia Seed Oil
Gustav Heess GmbH
2.00
B Softisan® 100
Hydrogenated Coco Glycerides
IOI Oleo GmbH
2.00
B Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
2.00

Manufacturing Process
Phase A: Combine all ingredients of phase A under stirring and stir until Cosphaderm® X 34 is completely
dissolved.
Phase B: Combine all ingredients of phase B. Heat both phases separately to 70 °C and add phase B
to phase A under stirring.
After stirring for 5 minutes homogenise the formulation and adjust the pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

RICH & SOFT HANDCREAM ALL NATURAL INGREDIENTS

200.4.1.2

REGENERATING. SOFT SKIN FEEL. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
76.55
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.25
B Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
2.50
B Montanov™ 68
Cetearyl AlcoholCetearyl Glucoside
SEPPIC, S.A.
2.00
B Tegomuls
Hydrogenated Palm Glyceride
-
0.50
B Ecorol® 18/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
B Beeswax
Cera alba
Gustav Heess GmbH
0.50
B Carnauba Wax
Copernicia Cerifera Cera
Gustav Heess GmbH
1.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
B Peach Kernel Oil
Prunus Persica Kernel Oil
Gustav Heess GmbH
1.50
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.50
B Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
B Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
C Cosphaderm® MultiMEG
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
Cosphatec GmbH
1.20

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 to phase A under strong stirring. Continue stirring for approx.
15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients together and heat to 80 °C.
Phase C: Add phase C to phase A+B and homogenise for approx. 1 min using Ultra-Turrax. Cool down
under medium stirring.
Phase D: Add Cosphaderm® MultiMEG below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: White, shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ORGANIC BODY BUTTER ALL NATURAL INGREDIENTS

200.112.1.1

RICH. NATURAL. SOFT.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
62.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
4.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00
A Cosphaderm® PA-12
Sodium Phytate
Cosphatec GmbH
0.10
B Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
3.50
B Cutina® GMS V
Glyceryl Stearate
BASF SE
3.00
B Lanette® O
Cetearyl Alcohol
BASF SE
4.00
B Beeswax white
Cera alba
Gustav Heess GmbH
1.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
5.00
B Babassu Oil
Orbignya Oleifera Seed Oil
Gustav Heess GmbH
5.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
3.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
5.00
B Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.30
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 75 °C and add phase B to A while stirring. Stir cold and homogenise at 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance:  White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

WARMING FOOTCREAM

200.36.1.1

WARMING. BOOSTING BLOOD CIRCULATION. NOURISHING.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Magnolia Extract 98, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
45.10
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A Urea
Urea
-
10.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
8.00
B Lanette® O
Cetearyl Alcohol
BASF SE
3.00
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
8.00
B Carnauba Wax
Copernicia Cerifera Cera
Gustav Heess GmbH
5.00
B Beeswax
Cera alba
Gustav Heess GmbH
8.00
B Cosphaderm® VBE
Vanillyl Butyl Ether
Cosphatec GmbH
0.50
B Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.80
B Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.30
B Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
5.00

Manufacturing Process
Phase A: Combine all ingredients of phase A. Slowly add Cosphaderm® X 34 to phase A and stir until completely dissolved.
Phase B: Combine all ingredients of phase B. Heat both phases separately to 80-82 °C.
Add then phase B to phase A under strong stirring and homogenise the formulation.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Shiny, white cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MenCare

AFTER SHAVE FLUID ALL NATURAL INGREDIENTS

600.105.1.1

FAST ABSORBING. HYDRATING. COOLING.

Alternative preservation: Cosphaderm® Hexiol natural, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
81.30
A Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.10
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A D-Panthenol 75 %
PanthenolAqua
-
0.50
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
A Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.10
B Montanov™ 202
Arachidyl AlcoholBehenyl AlcoholArachidyl Glucoside
SEPPIC, S.A.
5.00
B Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.30
B Bisabolol
Bisabolol
-
0.30
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
5.00
C Cosphaderm® Hexiol natural
1,2-Hexanediol
Cosphatec GmbH
2.00
C Menthol
Menthol
-
0.30

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C.
Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise.
Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FACE CREAM FOR MEN

600.56.2.1

BOOSTING. LIGHT SKIN FEEL. HYDRATING.

Preservation: Cosphagard® Elbe, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
9.00
A Coconut Oil
Cocos Nucifera Oil
Gustav Heess GmbH
2.00
A Shea Butter
Butyrospermum Parkii Butter
Gustav Heess GmbH
2.50
A Almond Oil
Prunus Amygdalus Dulcis Oil
1.50
A Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
A Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.50
A Macadamia Oil
Macadamia Ternifolia Seed Oil
Gustav Heess GmbH
1.50
A Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
A Ecorol® 16/98 P
Cetyl Alcohol
Ecogreen Oleochemicals
1.00
A Cosphaderm® GS Connect
Glyceryl Stearate Citrate
Cosphatec GmbH
3.00
B Demin. Water
Aqua
-
ad 100
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
B Ronacare® Allantoin
Allantoin
Merck KGaA
0.20
B Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.10
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
C Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.20
C D-Panthenol 75 %
PanthenolAqua
-
0.50
C Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.40
C Cosphagard® Elbe
AquaSodium LevulinateSodium Benzoate
Cosphatec GmbH
2.50

Manufacturing Process
Phase A: Combine all ingredients of phase A and heat to 80 °C.
Phase B: Combine all of the liquid ingredients and add the powders while stirring.
Then heat to 80 °C.
Afterwards combine phase A and B and homogenise the mixture.
Phase C: Add phase C to the formulation (<40 °C) and stir.
Homogenise a second time if needed.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: White, shiny emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

FRESH & COOL AFTERSHAVE

600.37.1.1

COOLING. SOOTHING. MOISTURISING.

Alternative preservation: Cosphaderm® MultiMEG, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
67.55
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
A Ronacare® Allantoin
Allantoin
Merck KGaA
0.20
A Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
0.50
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
3.50
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
4.00
B Olive Oil
Olea Europaea Fruit Oil
Gustav Heess GmbH
2.50
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
2.00
B Avocado Oil
Persea Gratissima Oil
Gustav Heess GmbH
2.00
B Sesame Oil
Sesamum Indicum Seed Oil
Gustav Heess GmbH
2.00
B Carotene Oil
Glycine Soja Oilbeta-carotene
-
0.05
B Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
2.00
B Cocoa Butter
Theobroma Cacao Seed Butter
Gustav Heess GmbH
0.20
B Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
B Lamecreme
Glyceryl StearateGlyceryl Stearate Citrate
-
4.00
B Camphor
Camphor
-
0.10
C Ethanol
Alcohol
Carl Roth GmbH & Co. KG
0.60
C Menthol
Menthol
FREY&LAU GmbH
0.70
D Cosphaderm® MultiMEG
Glyceryl CaprylatePentylene GlycolMagnolia Officinalis Bark Extract
Cosphatec GmbH
1.60

Manufacturing Process
Phase A: Add Allantoin to water and heat to 40 °C. Stir until complete dissolution. Add Glycerin and
Cosphaderm® Propanediol natural. While stirring add Cosphaderm® X 34. Stir until complete
dissolution. Then add Aristoflex® AVC and stir until complete dissolution.
Phase B: Prepare phase B and separately heat phase A and phase B to 80 °C.
Add phase B to phase A while stirring.
Phase C+D: Add phase C and D below 40 °C.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Yellowish cream
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

REVITALISING DAY CREAM FOR MEN ALL NATURAL INGREDIENTS

600.79.1.1

COOLING. HYDRATING. REFRESHING.

Alternative preservation: Cosphaderm® pAS natural, Cosphaderm® Capo, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
78.50
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
B Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.40
C PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
3.50
C Lanette® O
Cetearyl Alcohol
BASF SE
1.50
C Babassu Oil
Orbignya Oleifera Seed Oil
Gustav Heess GmbH
5.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
3.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
1.00
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
D Cosphaderm® Capo
Caprylyl GlycolPropanediol
Cosphatec GmbH
1.00
D Ethanol
Alcohol
-
0.50
D Menthol
Menthol
-
0.20

MANUFACTURING PROCESS
Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid.
Phase B: Add all ingredients of phase B to phase A. Then heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Phase D: Dissolve the menthol in Cosphaderm® Capo and ethanol and add below 40°C.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance:  white emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Babycare

BABY BATH ALL NATURAL INGREDIENTS

500.31.3.1

GENTLE CLEANSING. MILD. FOAMY.

Alternative Preservation: Cosphaderm® Pentiol natural, Cosphaderm® GeMix

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
55.70
A Cinnamic Acid
Cinnamic Acid
-
0.30
B Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
5.00
D Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
D Plantacare® 2000 UP
Decyl Glucoside
BASF SE
25.00
D Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00

Manufacturing Process
Phase A+B: Combine phase A in a beaker and stir until Cosphaderm® X 34 is dissolved.
Heat phase A to 60 °C and add phase B under strong stirring.
Phase C: Add phase C to phase A+B below 40 °C.
Phase D: Before adding phase D to the mixture increase the pH to 11 and add
Cosphaderm® CA natural.
Afterwards lower the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent, yellow gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MILD & FOAMY BABY SHAMPOO

500.30.1.1

GENTLE CLEANSING. MILD. VEGAN.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
74.00
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
2.50
A Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
2.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.00
A D-Panthenol 75 %
PanthenolAqua
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
1.00
C Plantacare® 818 UP
Coco Glucoside
BASF SE
5.00
C Plantacare® 2000 UP
Decyl Glucoside
BASF SE
10.00

Manufacturing Process
Phase A: Combine all ingredients of phase A.
Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution.
Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CALENDULA BABY LOTION ALL NATURAL INGREDIENTS

500.63.1.1

SOOTHING. SOFTENING. SOFT TEXTURE.

Alternative preservation: Cosphaderm® TOM

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
68.65
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Ronacare® Allantoin
Allantoin
Merck KGaA
0.30
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
A Cosphaderm® EGCg ECONAT
Camellia Sinensis Leaf Extract
Cosphatec GmbH
0.05
B PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
4.00
B Softisan® 100
Hydrogenated Coco Glycerides
IOI Oleo GmbH
2.00
B Sesame Oil
Sesamum Indicum Seed Oil
Gustav Heess GmbH
6.00
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
6.00
B Calendula Oil
Glycine Soja OilCalendula Officinalis Flower ExtractTocopherol
-
5.00
B Cocoa Butter
Theobroma Cacao Seed Butter
Gustav Heess GmbH
1.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Cosphaderm® TOM
Pentylene GlycolGlyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.60

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat phase A to 80°C.
Phase B: Prepare phase B and heat to 80°C. Add phase B to A and homogenise.
Phase C: Add phase C below 40°C to the formulation.
Adjust the pH value to 5.5 ± 0.05.

SPECIFICATION
Appearance: Light yellowish lotion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

CALMING BABY LOTION ALL NATURAL INGREDIENTS

500.43.2.1

NATURALLY MILD. SOOTHING. MOISTURISING.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
80.70
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cinnamic Acid
Cinnamic Acid
-
0.20
A Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.30
B Cosphaderm® Sodium Hyaluronate high
Sodium Hyaluronate
Cosphatec GmbH
0.20
C Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
C Shea Butter refined
Butyrospermum Parkii Butter
Gustav Heess GmbH
3.00
C Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
2.00
C PolyAquol®-2W
Polyglyceryl-2-StearateGlyceryl StearateStearyl Alcohol
Innovacos
2.50
C Lanette® 16
Cetyl Alcohol
BASF SE
1.00
C Beeswax white
Cera alba
Gustav Heess GmbH
2.50
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.50

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and raise the pH to 11 under stirring to dissolve cinnamic acid. When everything is dissolved, lower the pH back to 6 again.
Add phase B to A and stir until everything is dissolved. Heat phase A/B to 75 °C.
Phase C: Combine all ingredients and heat to 80 °C. Add then phase C to phase A/B under strong stirring and homogenise.
Adjust the pH to 5.5 ± 0.05.

SPECIFICATION
Appearance: White emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)