FORMULATIONS

MODERN COSMETICS FOR AMBITIOUS FORMULATORS

We understand the requirements and issues of cosmetic formulators. That’s why we spend a lot of time with application technology in our in-house laboratory. Here we investigate the incorporation and effect of raw materials in order to offer our customers the best possible support and appropriate recommendations.

We have provided a selected set of formulations for you to download here – enjoy!

FaceCare

SKIN PERFECTING TONER ALL NATURAL INGREDIENTS

100.61.1.2

EXFOLIATING. PORE SIZE REDUCING. SOOTHING.

Alternative preservation: Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
90.90
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
4.00
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
3.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
2.00
B Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural
completely.
Phase B: Add phase B and lower the pH to 4.0 ± 0.05.

Specification
Appearance: Clear solution
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

MOISTURISING DAYCREAM

100.1.1.1

RICH SKIN FEEL. QUICKLY ABSORBING. HYDRATING.

Alternative preservation: Cosphaderm® Dicapo

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
84.50
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.20
B Aristoflex® AVC
Ammonium Acryloyldimethyltaurate/ VP Copolymer
Clariant AG
1.00
C Cosphaderm® E NGM
Lysolecithin
Cosphatec GmbH
1.50
C Cegesoft® SH
Shorea Stenoptera Seed Butter
BASF SE
2.50
C Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
C Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
C Softisan® 154
Hydrogenated Palm Oil
IOI Oleo GmbH
1.00
C Cosphaderm® AP
Ascorbyl Palmitate
Cosphatec GmbH
0.20
C Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
1.00
D Cosphaderm® Dicapo
Caprylyl GlycolGlyceryl CaprylateDipropylene Glycol
Cosphatec GmbH
0.70

Manufacturing Process
Phase A: Mix all ingredients together.
Phase B: Slowly add Cosphaderm® X 34 and Aristoflex® AVC under vigorous stirring to phase A.
Continue stirring for approx. 15 min at 500 rpm until complete dissolution. Then heat to 80 °C.
Phase C: Mix all ingredients and heat to 80 °C. Add phase C to phase A+B and
homogenise via vigorous stirring for approx. 10 min.
Phase D: Add Cosphaderm® Dicapo below 40 °C under vigorous stirring.
Adjust pH if necessary.

Specification
Appearance: Shiny, viscous emulsion
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

BOOSTING GLOW MIST

100.35.1.1

REFRESHING. SKIN BOOSTING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Propanediol natural, Cosphaderm® Hexiol

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
76.05
A Aloe Vera Powder
Aloe Barbadensis Leaf Juice Powder
-
0.05
A RonaCare® Nicotinamide
Niacinamide
Merck KGaA
3.50
A Cosphaderm® Sodium Hyaluronate low
Sodium Hyaluronate
Cosphatec GmbH
0.20
A D-Panthenol 75 %
PanthenolAqua
-
1.00
A Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.50
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Olive Oil
Olea Europaea Fruit Oil
Gustav Heess GmbH
3.50
B Argan Oil
Argania Spinosa Kernel Oil
Gustav Heess GmbH
2.50
B Avocado Oil
Persea Gratissima Oil
Gustav Heess GmbH
2.00
B Evening Primrose Oil
Oenothera Biennis Oil
Gustav Heess GmbH
1.50
B Rosehip Seed Oil
Rosa Canina Fruit Oil
Gustav Heess GmbH
1.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
1.50
B Macadamia Nut Oil
Macadamia Ternifolia Seed Oil
Gustav Heess GmbH
0.50
B Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until complete dissolution.
Adjust the pH value to 5.5 ± 0.05.
Phase B: Prepare phase B in a separate beaker.
Add phase B to phase A without stirring and pour mixture into spray flask.

Specification
Appearance: Two-phase system with oil phase on top of translucent water phase
pH: 5.5 ± 0.05
Stability: Microbiological stability proven

HairCare

ANTI-DANDRUFF SHAMPOO (A) ALL NATURAL INGREDIENTS

400.62.1.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® Sodium pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® Sodium pAS natural
Sodium Anisate
Cosphatec GmbH
0.20
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Heat phase A to 40 °C.Raise the pH to 11 to dissolve Cosphagard® SA natural.
Phase B: Add phase B to A and stir until Cosphaderm® X 34 is completely dissolved.
Phase C: Add phase C under stirring.
Phase D: Add phase D to thicken the formulation.
Adjust the pH to 4.5 ± 0.05.

Specification
Appearance: translucent to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (B) ALL NATURAL INGREDIENTS

400.62.2.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
A Cosphaderm® pAS natural
p-Anisic Acid
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

ANTI-DANDRUFF SHAMPOO (C)

400.62.3.1

CLEANSING. FOAMING. NATURALLY ACTIVE AGAINST DANDRUFF.

Alternative preservation: Cosphaderm® LA-T, Cosphaderm® AS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
77.45
A Sodium Coco-Sulfate
Sodium Coco Sulfate
-
10.00
A Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
4.00
A Dehyton® K
Cocamidopropyl Betaine
BASF SE
2.00
A SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
1.00
A Cosphagard® SA natural
Salicylic Acid
Cosphatec GmbH
3.00
A Cosphaderm® AS
p-Anisic Acid
Cosphatec GmbH
0.20
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
C Cosphaderm® LA-T
Levulinic AcidGlycerinSodium LevulinateAqua
Cosphatec GmbH
1.00
D Sodium Chloride
Sodium Chloride
-
0.75

Manufacturing Process
Phase A: Combine all ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural.
Heat phase A to 70 °C.
Phase B: Combine all ingredients and stir until Cosphaderm® X 34 is completely dissolved.
Heat phase B to 70 °C.
Add phase B to phase A under very soft stirring.
Phase C: Add phase C below 40 °C to the finished formulation. Adjust the pH to 4.5 ± 0.05.
The shampoo will thicken within 24 hours.

Specification
Appearance: Clear to yellowish liquid
pH: 4.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

DETANGLE SHAMPOO ALL NATURAL INGREDIENTS

400.46.2.1

CONDITIONING. DETANGLING. SULFATE-FREE.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Sodium pAS natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
71.90
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
3.00
A Cosphaderm® X soft
Xanthan Gum
Cosphatec GmbH
1.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
B Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
1.00
B Cosphaderm® Sodium pAS natural
Sodium Anisate
Cosphatec GmbH
0.20
B SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
B Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
10.00
B Plantacare® 818 UP
Coco Glucoside
BASF SE
10.00
B Plantacare® 1200 UP
Lauryl Glucoside
BASF SE
2.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
0.30

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir slowly until Cosphaderm® CA natural is completely
dissolved.
Phase B: Combine all ingredients of phase B and stir until Cosphaderm® X soft is dissolved.
Heat both phases separately to 50 °C and add phase B to phase A under thorough stirring with
the propeller stirrer. Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Milky, white gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

NATURAL CONDITIONER ALL NATURAL INGREDIENTS

400.72.1.1

LIGHT TEXTURE. SOFTENING. ANTI-FRIZZ.

Alternative preservation: Cosphaderm® Capo, Cosphaderm® Magnolia Extract 98

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
87.45
A Hydrolyzed Oat Protein
Hydrolyzed Oat Protein
-
0.50
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.15
B Lanette®N
Cetearyl AlcoholSodium Cetearyl Sulfate
BASF SE
5.00
B Lanette® O
Cetearyl Alcohol
BASF SE
2.00
B MCT Oil Typ V Ph. Eur.
Caprylic/Capric Triglyceride
Gustav Heess GmbH
2.00
B Cosphaderm® SF-D organic
Lecithin
Cosphatec GmbH
1.50
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.20
C Cosphaderm® Capo
Caprylyl GlycolPropanediol
Cosphatec GmbH
1.00
C Cosphaderm® Magnolia Extract 98
Magnolia Officinalis Bark Extract
Cosphatec GmbH
0.20

MANUFACTURING PROCESS
Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved.
Phase B: Combine all ingredients of phase B.
Heat both phases separately to 70-75 °C and add phase B to A while homogenising.
Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Capo. Add phase C to phase A/B under stirring.
Adjust the pH to 4.0 ± 0.05.

SPECIFICATION
Appearance: beige emulsion
pH: 4.0 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Cleansing

ALOE VERA MICELLAR WATER ALL NATURAL INGREDIENTS

300.12.3.1

DEEP CLEANSING. REFRESHING. MAKE-UP REMOVING.

Alternative preservation: Cosphaderm® Sodium LAAS, Cosphaderm® Propanediol natural, Cosphaderm® Pentiol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
63.50
A Aloe Vera Juice 100 %
Aloe Barbadensis Leaf Juice
-
20.00
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
5.00
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
1.00
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.60
B Plantacare® 2000 UP
Decyl Glucoside
BASF SE
3.80

Manufacturing Process
Phase A: Combine all ingredients of phase A in a beaker and stir with the propeller stirrer
at 1500 rpm for 3 minutes.
Phase B: Add phase B to phase A and stir slowly at 500 rpm.
Adjust the pH to 5.5 ± 0.05.

Specification
Appearance: Transparent liquid
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

PURIFYING CLEANSING LOTION

300.32.3.1

MAKE-UP REMOVING. PURIFYING. CLEANSING.

Preservation: Cosphagard® Pol, Cosphaderm® GMCY

PHASE Ingredient Cosmos INCI SUPPLIER %
A Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
10.00
A Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
12.00
A Lanette® O
Cetearyl Alcohol
BASF SE
5.00
A Cosphaderm® SF-75H
Hydrogenated Lecithin
Cosphatec GmbH
2.00
A Cosphaderm® GMCY
Glyceryl Caprylate
Cosphatec GmbH
0.30
B Demin. Water
Aqua
-
ad 100
B Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
2.00
B Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.20
B Cosphagard® Pol
AquaSodium LevulinatePotassium Sorbate
Cosphatec GmbH
2.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
C D-Panthenol 75 %
PanthenolAqua
-
1.00
C Ronacare® Allantoin
Allantoin
Merck KGaA
0.50

Manufacturing Process
Phase A: Prepare phase A and heat to 65 °C.
Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B
under stirring.
Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to
phase A to emulsify both phases. Stir until the formulation is cooled down.
Phase C: Add phase C below 30 °C and stir until everything is mixed.
Adjust the pH to 5.5 ± 0.05 if necessary.

Specification
Appearance: White gel
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT CLEANSING FOAM ALL NATURAL INGREDIENTS

300.83.1.1

GENTLE CLEANSING. REFRESHING. SOOTHING.

Alternative preservation: Cosphaderm® GeMix, Cosphaderm® Pentiol natural, Cosphaderm® Propanediol natural

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
83.40
A Cosphaderm® Pentiol natural
Pentylene Glycol
Cosphatec GmbH
3.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Cosphaderm® Propanediol natural
Propanediol
Cosphatec GmbH
3.00
A D-Panthenol 75 %
PanthenolAqua
-
1.00
B Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.10
B Cosphaderm® Sodium Hyaluronate
Sodium Hyaluronate
Cosphatec GmbH
0.10
C Plantacare® 818 UP
Coco Glucoside
BASF SE
4.00
C Perlastan® SC
Sodium/Disodium Cocoyl Glutamate
Schill + Seilacher Struktol GmbH
4.00
C SOFTISAN® conditionHAIR
PCA Glyceryl Oleate
IOI Oleo GmbH
0.50
C Cosphaderm® GeMix
Glyceryl CaprylateGlyceryl Undecylenate
Cosphatec GmbH
0.80

Manufacturing Process
Phase A: Combine all ingredients of phase A and stir until everything is dissolved.
Phase B: Add phase B to phase A under stirring.
Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under
stirring.
Adjust pH to 5.5 ± 0.05.

Specification
Appearance: Transparent solution
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

SOFT CREAM SOAP

300.47.2.1

CLEANSING. FOAMING. FREE OF LISTED PRESERVATIVES.

Alternative preservation: Cosphaderm® Sodium LAAS

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
ad 100
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® X 34
Xanthan Gum
Cosphatec GmbH
0.50
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Carbopol® Ultrez 21 Polymer
Acrylates/C10-30 Alkyl Acrylate Crosspolymer
Lubrizol
0.40
A Cosphaderm® Sodium LAAS
Sodium LevulinateSodium Anisate
Cosphatec GmbH
1.00
B Texapon® NSO UP
Sodium Laureth Sulfate
BASF SE
15.00
B Plantacare® 818 UP
Coco Glucoside
BASF SE
12.00
B Sunflower Oil
Helianthus Annuus Seed Oil
Gustav Heess GmbH
2.00
B Almond Oil
Prunus Amygdalus Dulcis Oil
Gustav Heess GmbH
2.00
B Jojoba Oil
Simmondsia Chinensis Seed Oil
Gustav Heess GmbH
2.00
B Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
2.00
B Cosphaderm® T-70 NON GMO ECO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.30
C Phenylpropanol
Phenylpropanol
-
0.30

Manufacturing Process
This formulation can be prepared at room temperature.
Phase A: Combine all ingredients and stir until everything is completely dissolved.
Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both
phases are mixed.
Phace C: Add Cosphaderm® PhP to phase A+B. Adjust th pH to 5.5 ± 0.05.

Specification
Appearance: Transparent liquid
pH: 5.5 ± 0.05
Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)

Sun & Color Care

SOOTHING 2IN1 MAKE-UP REMOVER

300.11.1.1

SOOTHING. MAKE-UP REMOVING. CLEANSING.

Alternative preservation: Cosphaderm® Hexiol, Cosphaderm® Pentiol GL

PHASE Ingredient Cosmos INCI SUPPLIER %
A Demin. Water
Aqua
-
70.35
A Glycerin
Glycerin
CREMER OLEO GmbH & Co. KG
5.00
A Cosphaderm® PA ECONAT
Phytic AcidAqua
Cosphatec GmbH
0.10
A Plantacare® 2000 UP
Decyl Glucoside
BASF SE
0.30
B Cosphaderm® Hexiol
1,2-Hexanediol
Cosphatec GmbH
1.00
B Cosphaderm® CHA
Caprylhydroxamic Acid
Cosphatec GmbH
0.15
B Cosphaderm® Pentiol GL
Pentylene Glycol
Cosphatec GmbH
3.00
C Cosphaderm® Feel
Triheptanoin
Cosphatec GmbH
20.00
C Cosphaderm® T-70 NON GMO
TocopherolHelianthus Annuus Seed Oil
Cosphatec GmbH
0.10
C Oil-soluble Colour
-
q.s
C Perfume
Parfum
-
q.s.

Manufacturing Process
Phase A: Mix all ingredients of phase A under slow stirring.
Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A.
Adjust the pH of phase A+B to 5.5 ± 0.05.
Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring.

Specification
Appearance: Two-phase system with coloured oil phase on top of translucent water phase
pH: 5.5 ± 0.05
Stability: Microbiological stability proven