MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 - 6.0 by adding diluted Citric Acid. Phase B: Combine all ingredients and heat to 75-80 °C. Then add phase B to phase A while homogenising. Add phase C to the finished formulation and homogenise. SPECIFICATION Appearance: White emulsion Stability: Microbiohas not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and heat to 80-85 °C until everything is melted. Phase B: Add all ingredients of phase B to phase A at 70°C. Phase C: Premix the pigments in the oils until everything is homogeneous and add it to the hot phase A+B and fill into packaging. SPECIFICATION Appearance: solid stick Stability: Microbiological stability proven (Water activity valuehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Add phase C to the formulation and stir. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White emulsion pH: 5.5 +_ 0.05 Stability: Mihas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White emulshas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 ± 0.05. SPECIFICATION Appearance: White cream has not

MANUFACTURING PROCESS Phase A: Prepare phase A and heat to 60-65 °C. Stir until complete dissolution. Phase B: Let the mixture cool down and add phase B at room temperature. Phase C: Add colour as desired. SPECIFICATION Appearance: Yellowish oil gel Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat the water phase to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearanhas not

MANUFACTURING PROCESS Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Add all ingredients from phase B one after another. Adjust the pH to 4.0 ± 0.05. SPECIFICATION Appearance: Clear solution pH: 4.0 ± 0.05 Stability: Microbiological stability proven, no separation after centrhas not