MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 ± 0.05. SPECIFICATION Appearance: White cream has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat the water phase to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearanhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 ± 0.05. Phase B: Combine all ingredients of phase B. Heat phase B to 80 °C and slowly add phase A to B while homogenising. SPECIFICATION Appearance:  white emulsion pH: 5.5 ± 0.05 Stability: Microbiological stability proven, no separation after centrifugation has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A while stirring. Then homogenise the formulation. Phase C: Dissolve Cosphaderm® Magnolia Extract 98 in Cosphaderm® Dicapo natural. Add phase C and phase D to phase A+B after coolinghas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Then heat phase A+B to 75 °C. Phase C: Combine all ingredients of phase C and heat to 75 °C. Then add phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 4.5 +_ 0.05. SPECIFICATION Appearance: White crehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to A while stirring. Phase C: Add phase C to the water phase while stirring. Then heat the water phase to 70-75 °C. Phase D: Combine all ingredients of phase D and heat to 75°C. Phase E is added to the oil phase just before emulsion is formed. Add phase D+E to the wahas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add Cosphaderm® SF-75H to phase A and let it soak for 20 minutes. Then heat phase A+B to 70 °C. Phase C: Combine all ingredients of phase C and heat to 70 °C. Add then phase C to phase A+B under strong stirring and homogenise the formulation. Adjust the pH to 4.8 +_ 0.05. SPhas not

MANUFACTURING PROCESS Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Then heat phase A/B to 75 °C. Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A/B under strong stirring anhas not