Manufacturing Process Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11 to dissolve it completely. Then add Cosphaderm® LA-T to lower the pH again. Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C. Add phase B to phase A under thorough stirring withas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Combine all ingredients and heat phase B to 40 – 50 °C. Afterwards combine phase A and B while stirring slowly until a homogeneous gel is formed. Phase C: Add panthenol to the mixture (<40 °C). Adjust pH to 5.5 +_ 0.05. Specification Appearance: Yellowish, slightly turbid, viscoushas not

Manufacturing Process Phase A: Mix all ingredients of phase A and stir until everything is dissolved. Phase B: Mix phase B and heat phase A and B separately to 50 °C. Add phase A to phase B under soft stirring. Try to avoid air bubbles. Adjust the pH to 5.0 +_ 0.05. Specification Appearance: Yellowish gel pH: 5.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugatiohas not

Manufacturing Process Phase A+B: Combine phase A in a beaker and stir until Cosphaderm® X 34 is dissolved. Heat phase A to 60 °C and add phase B under strong stirring. Phase C: Add phase C to phase A+B below 40 °C. Phase D: Before adding phase D to the mixture increase the pH to 11 and add Cosphaderm® CA natural. Afterwards lower the pH to 5.5 +_ 0.05. Specification Appearance: Transparent, yellhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir slowly until Cosphaderm® CA natural is completely dissolved. Phase B: Combine all ingredients of phase B and stir until Cosphaderm® X soft is dissolved. Heat both phases separately to 50 °C and add phase B to phase A under thorough stirring with the propeller stirrer. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Slowly add phase B to phase A under stirring. Stir until complete dissolution. Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent gel pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugatihas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent solution pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

Manufacturing Process Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA while stirring, then heat mixture to 70 °C. Stir phase A until complete dissolution. Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring. Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Transparent has not