MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75 °C and add phase B to A while stirring. Stir cold and homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance:  White high viscous emulsion pH: 5.5 +_ 0.05 Stability: No separation afthas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 +_ 0.05. Phase B: Combine all ingredients and melt at 40-50 °C. Then add phase A to phase B while homogenising. SPECIFICATION Appearance: White viscous lotion pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at rhas not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and stir until homogeneous. SPECIFICATION Appearance: Yellow liquid Stability: stable for 3 months at room temperature and 40 °C Microbiological stability: proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Add phase B to the water phase while stirring. Then heat the water phase to 70-75 °C. Phase C: Combine all ingredients of phase C and heat to 75°C. Add phase C to the water phase while stirring. Add phase D to the emulsion and homogenise. Adjust the pH to 5.5 +_ 0.05. SPECIFIhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75 °C and add phase B to A while stirring very fast. Homogenise. Adjust the pH to 5.0 +_ 0.05. Specification Appearance: White viscous lotion pH: 5.0 +_ 0.05 Stability: No separation after centrifugation (400has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve Cosphaderm® Panthenol natural in water and add phase C below 40 °C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: Whitehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 +_ 0.05. Phase B: Combine all ingredients and heat to 75-80 °C. Then add phase B to phase A while homogenising. Add phase C to the finished formulation and homogenise. SPECIFICATION Appearance: White low viscous emulsion Stability: No separation after centhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C. Phase D: Dissolve Cosphaderm® Panthenol natural in water and add phasehas not