Manufacturing Process Phase A: Combine ingredients and stir until Cosphaderm® Magnolia Extract 98 is dissolved. Phase B: Prepare phase B and add to phase A under stirring. Heat the mixture to 50 °C. Phase C: Slowly add phase C into A+B and stir until complete dissolution. Phase D: Prepare phase D and add it to phase A+B+C under stirring. Phase E: Add phase E to the mixture and stir for 10 minutes at 10has not

Manufacturing Process Phase A: Mix all ingredients together. Phase B: Mix phase B and heat phase A and B separately to 75 °C. Emulsify phase A+B and homogenise. Phase C: Add phase C to phase A+B below 40 °C. Phase D: Add Cosphaderm® Dicapo to the formulation and allow the mixture to cool down. Adjust pH to 6.0 +_ 0.05. Specification Appearance: Creamy, green mask pH: 6.0 +_ 0.05 Stability: Microhas not

Manufacturing Process Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11 to dissolve it completely. Then add Cosphaderm® LA-T to lower the pH again. Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C. Add phase B to phase A under thorough stirring withas not