MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 - 6.0 by adding diluted Citric Acid. Phase B: Combine all ingredients and heat to 75-80 °C. Then add phase B to phase A while homogenising. Add phase C to the finished formulation and homogenise. SPECIFICATION Appearance: White emulsion Stability: Microbiohas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Add phase C to the formulation and stir. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White emulsion pH: 5.5 +_ 0.05 Stability: Mihas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White emulshas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 ± 0.05. SPECIFICATION Appearance: White cream has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat the water phase to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearanhas not

MANUFACTURING PROCESS Phase A: Combine the ingredients of phase A. Raise the pH to 11 to dissolve Cosphagard® SA natural. When everything is dissolved, lower the pH back to 4-5 again. Phase B: Add all ingredients from phase B one after another. Adjust the pH to 4.0 ± 0.05. SPECIFICATION Appearance: Clear solution pH: 4.0 ± 0.05 Stability: Microbiological stability proven, no separation after centrhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 ± 0.05. Phase B: Combine all ingredients of phase B. Heat phase B to 80 °C and slowly add phase A to B while homogenising. SPECIFICATION Appearance:  white emulsion pH: 5.5 ± 0.05 Stability: Microbiological stability proven, no separation after centrifugation has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until dispersed. Phase B: Prepare phase B and lower the pH to ~ 5.5. Add phase C and phase A to phase B. Adjust the pH to 5.5 +_ 0.05. Heat the prepared solution to 80 - 90 °C and stir at this temperature for 2 – 3 min. Quickly pour the warm mixture into moulds and let it cool down. SPECIFICATION Appearance: Clear, solidhas not