MANUFACTURING PROCESS Phase A: Prepare phase A and heat to 60-65 °C. Stir until complete dissolution. Phase B: Let the mixture cool down and add phase B at room temperature. Phase C: Add colour as desired. SPECIFICATION Appearance: Yellowish oil gel Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 ± 0.05. Phase B: Combine all ingredients of phase B. Heat phase B to 80 °C and slowly add phase A to B while homogenising. SPECIFICATION Appearance:  white emulsion pH: 5.5 ± 0.05 Stability: Microbiological stability proven, no separation after centrifugation has not

MANUFACTURING PROCESS Phase A: Mix all ingredients together and stir until homogeneous. SPECIFICATION Appearance: Yellow liquid Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 75 °C and add phase B to A while homogenising. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance:  white emulsion pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifhas not

MANUFACTURING PROCESS Combine all ingredients of phase A, heating to 75 °C. When everything has melted, add phase B. Take off heat and fill into packaging. SPECIFICATION Appearance: Solid, yellowish balm Stability: Microbiological stability proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and raise the pH to 10 to dissolve Cosphaderm® pAS natural. Stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 +_ 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Phase C: Combine all ingredients and heat to 80 °C. Then add phase A/B to phase C while homogenising. Add phase D to has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat phase A to 80°C. Phase B: Prepare phase B and heat to 80°C. Add phase B to A and homogenise. Phase C: Add phase C below 40°C to the formulation. Adjust the pH value to 5.5 +_ 0.05. SPECIFICATION Appearance: Light yellowish lotion pH: 5.5 +_ 0.05 Stability: Microbiological has not

Manufacturing Process Phase A: Combine all ingredients of phase A and heat to 80 °C. Phase B: Combine all of the liquid ingredients and add the powders while stirring. Then heat to 80 °C. Afterwards combine phase A and B and homogenise the mixture. Phase C: Add phase C to the formulation (<40 °C) and stir. Homogenise a second time if needed. Adjust pH to 5.5 +_ 0.05. Specification Appearance:has not