MOISTURISING MAGNOLIA CREAM GEL

Manufacturing Process Phase A: Prepare phase A and melt at 50 °C, then cool down to room temperature. Phase B: Prepare phase B and stir for 10 min. Phase C: Prepare all ingredients of phase C except water. Slowly add the water under stirring and stir until complete dissolution. Combine phase A and B and homogenise. Add phase A+B in slow steps to phase C under thorough stirring with the propeller stirrehas not

RICH NIGHTCREAM

Manufacturing Process Phase A: Mix phase A and stir until everything is completely dissolved. Phase B: Add phase B to phase A and stir until dispersed. Phase C: Slowly add phase C to phase A+B and stir until complete dissolution. Phase D: Mix all ingredients of phase D and heat phase A+B+C and D separately to 80 °C. Add phase D slowly to phase A+B+C while stirring. Phase E: Add Panthenol to the finishehas not

URBAN ANTI-POLLUTION SKIN ELIXIR

Manufacturing Process Phase A: Prepare phase A and stir at 2000 rpm until complete dissolution. Phase B: Prepare phase B and heat to 50 °C until everything is melted. Let the mixture cool down to room temperature. Phase C: Prepare phase C and stir for 10 min at 800 rpm. Add phase C to phase B and stir at 2000 rpm to emulsify both phases. Add phase A to phase B+C and homogenise for 3 minutes. Adjust thhas not

FACE SHEET MASK

Manufacturing Process This formulation can be prepared at room temperature. Phase A: Combine all ingredients. Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring for approx. 15 min at 700 – 1000 rpm until complete dissolution. Adjust pH to 6.5 +_ 0.05 if necessary. Specification Appearance: Translucent serum pH: 6.5 +_ 0.05 Stability: Microbiological stability prohas not
Register now for the Newsletter!

HYDRO JELLY MASK

Manufacturing Process Phase A: Prepare phase A and stir until dispersed. Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution. Phase C: Prepare phase C and stir for 10 minutes. Add phase C to phase A+B and adjust pH to 5.5 – 6.0 +_ 0.05. Phase D: Add colour if wanted. Heat the mixture to its boiling point and keep this temperature for 2 – 3 minutes. Quickly pohas not

BOOSTING GLOW MIST

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until complete dissolution. Adjust the pH value to 5.5 +_ 0.05. Phase B: Prepare phase B in a separate beaker. Add phase B to phase A without stirring and pour mixture into spray flask. Specification Appearance: Two-phase system with oil phase on top of translucent water phase pH: 5.5 +_ 0.05 Stability: Microbiological stabilhas not

WARMING SCALP TREATMENT

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Slowly add phase B to A while stirring. Phase C: Mix all ingredients of phase C and add to phase A+B while stirring. Adjust the pH to 5.0 +_ 0.05. SPECIFICATION Appearance: Clear solution pH: 5.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifhas not

CONDITIONING SHAMPOO

Manufacturing Process Phase A: Mix all ingredients of phase A and stir until everything is dissolved. Phase B: Mix phase B and heat phase A and B separately to 50 °C. Add phase A to phase B under soft stirring. Try to avoid air bubbles. Adjust the pH to 5.0 +_ 0.05. Specification Appearance: Yellowish gel pH: 5.0 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugatiohas not
×
REGISTER FOR OUR NEWSLETTER!
Always stay up to date! We will send you news and updates about our company, market insights and latest innovations at irregular intervals.
[borlabs-cookie id="brevo" type="content-blocker"] [/borlabs-cookie]