Manufacturing Process Phase A: Combine all ingredients of phase A in a beaker and stir with the propeller stirrer at 1500 rpm for 3 minutes. Phase B: Add phase B to phase A and stir slowly at 500 rpm. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Transparent liquid pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

Manufacturing Process Phase A: Prepare phase A and heat to 65 °C. Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B under stirring. Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to phase A to emulsify both phases. Stir until the formulation is cooled down. Phase C: Add phase C below 30 °C and stir untilhas not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent solution pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

Manufacturing Process This formulation can be prepared at room temperature. Phase A: Combine all ingredients and stir until everything is completely dissolved. Phase B: Combine phase B separately and add phase B to phase A under soft stirring. Stir until both phases are mixed. Phace C: Add Cosphaderm® PhP to phase A+B. Adjust th pH to 5.5 +_ 0.05. Specification Appearance: Transparent liquid pH: 5.has not

Manufacturing Process Phase A: Mix all ingredients of phase A under slow stirring. Phase B: Mix all ingredients of phase B until everything is completely dissolved and add B to phase A. Adjust the pH of phase A+B to 5.5 +_ 0.05. Phase C: Mix all ingredients of phase C and add the mixture to phase A+B without stirring. Specification Appearance: Two-phase system with coloured oil phase on top of transluhas not