Manufacturing Process Phase A: Prepare phase A and heat to 70 °C until fully melted. Stir until complete dissolution. Pour into container and let it cool down. Specification Appearance: Yellow balm Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

Manufacturing Process Phase A: Mix all ingredients together. Phase B: Mix phase B and heat phase A and B separately to 75 °C. Emulsify phase A+B and homogenise. Phase C: Add phase C to phase A+B below 40 °C. Phase D: Add Cosphaderm® Dicapo to the formulation and allow the mixture to cool down. Adjust pH to 6.0 +_ 0.05. Specification Appearance: Creamy, green mask pH: 6.0 +_ 0.05 Stability: Microhas not

Manufacturing Process Phase A: Combine all ingredients of phase A except Cosphaderm® CA natural and Cosphaderm® LA-T and stir for 10 min at 1500 rpm. Add Cosphaderm® CA natural and raise the pH to 11 to dissolve it completely. Then add Cosphaderm® LA-T to lower the pH again. Phase B: Prepare phase B and heat phase A and phase B separately to 75 °C. Add phase B to phase A under thorough stirring withas not