MANUFACTURING PROCESS Phase A: Prepare phase A. Raise the pH to 10 to dissolve Cosphaderm® pAS natural and stir until everything is completely dissolved. Afterwards, adjust the pH to 5.5 ± 0.05 by adding Citric Acid. Phase B: Add all ingredients of phase B to phase A. Then heat phase A/B to 75 °C. Phase C: Combine all ingredients and heat to 75 °C. Add then phase C to phase A/B under strong stirring an
Manufacturing Process Phase A: Add Cosphaderm® X soft to the water and stir until it’s completely dissolved. Phase B: Add phase B in small steps to phase A while stirring at 1500rpm. Phase C: Add phase C in small steps to phase A+B while stirring at 1500rpm. Adjust the pH to 7.0 +_ 0.05. Specification Appearance: translucent, viscous gel pH: 7.0 +_ 0.05 Tested against bacteria according to DIN
Manufacturing Process Phase A: Add Allantoin to water and heat to 40 °C. Stir until complete dissolution. Add Glycerin and Cosphaderm® Propanediol natural. While stirring add Cosphaderm® X 34. Stir until complete dissolution. Then add Aristoflex® AVC and stir until complete dissolution. Phase B: Prepare phase B and separately heat phase A and phase B to 80 °C. Add phase B to phase A while stirring.
Manufacturing Process Phase A: Combine ingredients and stir until Cosphaderm® Magnolia Extract 98 is dissolved. Phase B: Prepare phase B and add to phase A under stirring. Heat the mixture to 50 °C. Phase C: Slowly add phase C into A+B and stir until complete dissolution. Phase D: Prepare phase D and add it to phase A+B+C under stirring. Phase E: Add phase E to the mixture and stir for 10 minutes at 10