Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved. Phase C: Add phase C and stir until everything is homogeneous. Adjust pH value to 5.50 +_ 0.05. Specification Appearance: Clear, red, low viscous solution pH: 5.5 +_ 0.05 Stability: No separation after centrihas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Slowly add phase B to A while stirring. Phase C: Mix all ingredients of phase C and add to phase A+B while stirring. Adjust the pH to 5.0 +_ 0.05. SPECIFICATION Appearance: Transparent, low viscous serum pH: 5.0 +_ 0.05 Stability: No separation after centrifugation (4000 rpm,has not

Manufacturing Process Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C. Phase B: Combine all ingredients of phase B separately and heat to 90°C. Add phase B to phase A while stirring. Homogenise while cooling. Phase C: Add phase C and mix/homogenise. Adjuhas not