Manufacturing Process Phase A: Disperse Cosphaderm® X 34 in glycerol and add demin. water. Stir until everything is dissolved. Phase B: Add phase B to phase A. Adjust the pH to 4.8 - 5.0. Specification Appearance: Transparent, high viscous gel pH: 4.8 - 5.0 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C Microbiological stability:has not

Manufacturing Process Combine all ingredients of phase A and heat to 75-80°C until everything has melted. Then add phase B to phase A and stir until everything is homogeneous. Add phase C and fill into molds. Specification Appearance: Slightly yellowish balm Stability: stable for 3 months at room temperature and 40 °C Microbiological stability: proven (Water activity value less than 0.75)has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Adjust the pH to 5.5 +_ 0.05. Phase B: Combine all ingredients and melt at 40-50 °C. Then add phase A to phase B while homogenising. SPECIFICATION Appearance: White viscous lotion pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at rhas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve Cosphaderm® Panthenol natural in water and add phase C below 40 °C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: Whitehas not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients and heat to 75 °C. Add then phase B to phase A under strong stirring and homogenise. Phase C: Dissolve the menthol in Cosphaderm® Hexiol natural and add below 40°C. Phase D: Dissolve Cosphaderm® Panthenol natural in water and add phasehas not

Manufacturing Process Phase A: Allow the Cosphaderm® Diols + Hydrolyzed Jojoba Esters to pre-dissolve. Then add to the water and add the thickeners while stirring. Mix until everything is homogeneous and heat to 85-90°C. Phase B: Combine all ingredients of phase B separately and heat to 90°C. Add phase B to phase A while stirring. Homogenise while cooling. Phase C: Add phase C and mix/homogenise. Adjuhas not