Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved. Phase C: Add phase C and stir until everything is homogeneous. Adjust pH value to 5.50 +_ 0.05. Specification Appearance: Clear, red, low viscous solution pH: 5.5 +_ 0.05 Stability: No separation after centrihas not

Manufacturing Process Combine all ingredients of phase A and stir until everything is completely dissolved. Then add phase B to phase A under stirring. Adjust the pH to 6.0 +_ 0.05 to thicken the formulation. Specification Appearance: Transparent, clear, viscous gel pH: 6.0 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °C Michas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent, clear liquid pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and 40 °has not

MANUFACTURING PROCESS Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Heat to 70-75 °C. Phase B: Combine all ingredients of phase B and heat to 75°C. Phase C is added to the oil phase just before emulsion is formed. Add phase B+C to the water phase while stirring. Homogenise at 40°C. Adjust the pH to 5.5 +_ 0.05. SPECIFICATION Appearance: White, viscouhas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Prepare phase B and slowly add to phase A under stirring. Continue stirring until everything is completely dissolved. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent, low viscous serum pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, 30 min), stable for 3 months at room temperature and has not

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until complete dissolution. Adjust the pH value to 5.5 +_ 0.05. Phase B: Prepare phase B in a separate beaker. Add phase B to phase A without stirring and pour mixture into spray flask. Specification Appearance: Liquid two-phase system with oil phase on top of transparent water phase pH: 5.5 +_ 0.05 Stability: Stable for 3 mohas not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved. Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent, viscous gel pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, has not

Manufacturing Process Phase A: Combine all ingredients of phase A. Phase B: Add phase B to phase A while stirring and stir until everything is completely dissolved. Phase C: Prepare phase C and add to phase A+B under slow stirring to prevent foaming. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent, viscous gel pH: 5.5 +_ 0.05 Stability: No separation after centrifugation (4000 rpm, has not