ALOE VERA MICELLAR WATER

Manufacturing Process Phase A: Combine all ingredients of phase A in a beaker and stir with the propeller stirrer at 1500 rpm for 3 minutes. Phase B: Add phase B to phase A and stir slowly at 500 rpm. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Transparent liquid pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no separation after centrifugation (4000 rpm, 30 min)has not

BALM TO MILK FACIAL CLEANSER

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is completely dissolved. Phase B: Combine all ingredients of phase B. Heat both phases separately to 70-75 °C and add phase B to A very slowly while homogenising. Phase C: Cool down to 40°C and add Phase C. Specification Appearance: Slightly yellowish gel Stability: Microbiological stability proven (Water ahas not

FACIAL CLEANSING LOTION

Manufacturing Process Phase A: Combine water and Cosphagard® SA natural and raise the pH value to 10 – 11. Stir until complete dissolution. Afterwards lower the pH to approximately 6. Phase B: Add phase B to phase A and stir until everything is completely dissolved. Heat to 70 °C. Phase C: Combine all ingredients of phase C and heat to 70 °C. Add phase C to A+B while stirring. Homogenise at 40°C. has not

PURIFYING CLEANSING LOTION

Manufacturing Process Phase A: Prepare phase A and heat to 65 °C. Phase B: Combine all ingredients except Cosphaderm® X 34. Slowly add Cosphaderm® X 34 to phase B under stirring. Stir until complete dissolution. Then heat phase A and phase B separately to 65 °C. Add phase B to phase A to emulsify both phases. Stir until the formulation is cooled down. Phase C: Add phase C below 30 °C and stir untilhas not
Register now for the Newsletter!

SOFT CLEANSING FOAM

Manufacturing Process Phase A: Combine all ingredients of phase A and stir until everything is dissolved. Phase B: Add phase B to phase A under stirring. Phase C: Combine all ingredients of phase C separately. Add then phase C to phase A and B under stirring. Adjust pH to 5.5 +_ 0.05. Specification Appearance: Transparent solution pH: 5.5 +_ 0.05 Stability: Microbiological stability proven, no sepahas not

SOFT FACE CLEANSER

Manufacturing Process Phase A: Mix all ingredients except Cosphaderm® CHA. Add Cosphaderm® CHA while stirring, then heat mixture to 70 °C. Stir phase A until complete dissolution. Phase B: Slowly add Cosphaderm® X 34 to phase A while stirring. Phase C: Mix phase C and add to phase A+B while carefully stirring to prevent foaming. Adjust the pH to 5.5 +_ 0.05. Specification Appearance: Transparent has not

HYGIENIC HAND GEL

Manufacturing Process Phase A: Add Cosphaderm® X soft to the water and stir until it’s completely dissolved. Phase B: Add phase B in small steps to phase A while stirring at 1500rpm. Phase C: Add phase C in small steps to phase A+B while stirring at 1500rpm. Adjust the pH to 7.0 +_ 0.05. Specification Appearance: translucent, viscous gel pH: 7.0 +_ 0.05 Tested against bacteria according to DIN has not

JELLY SOAP

Manufacturing Process Phase A: Prepare phase A and stir until dispersed. Phase B: Slowly add the water to phase A under stirring and stir until complete dissolution. If wanted, add heat-proof colour. Phase C: Prepare phase C, adjust the pH to 5.5 +_ 0.05 and set aside. Heat phase A+B to its boiling point and keep this temperature for 2 - 3 min. Add phase C to the hot phase A+B. Continue stirring until ehas not
×
REGISTER FOR OUR NEWSLETTER!
Always stay up to date! We will send you news and updates about our company, market insights and latest innovations at irregular intervals.
[borlabs-cookie id="brevo" type="content-blocker"] [/borlabs-cookie]